|
|
工作原理開發的結合的干燥，凝聚/銑削和分類原則，在一臺機器。微型閃蒸干燥機干燥系統在世界上這種類型的專利。主要特點 在一個單一的單元干燥，粉碎并分級水分和細度控制飼料粘度為0.2至10 m.Pa.s.高達650℃的氣體溫度的干燥條件緊湊的設計無進料含水率的限制開放式，封閉式回收系統的概念，低停留時間閃蒸干燥到亞微米級材料在一臺機器的干燥，研磨和分類 干燥的顆粒，然后在頂部干燥器進入分級區。特定的一組點的以下的細顆粒離開干燥機的出口處，并在一個合適的過濾器收集。由分類器拒絕的粗大粒子在內部回收并返回到研磨部分，用于進一步處理。產品 懸浮液泥漿漿料和面團濕粉結塊濾餅按壓濾后的蛋糕觸變材料濕研磨納米顆粒產品的分散程度的 基于在干燥過程中所需要的量的分散，研磨部的執行可以適應。幾個的轉子和分類給予不同程度的分散/研磨： 溫和地分散高分散的固體銑床高分散懸浮和粘/粘性液體微型機的加熱原理的示意性草圖 微型機是一種通用機直接干燥相結合。熱基本上是轉移到產品的氣體的流動，以蒸發溶劑和揮發物。根據不同的應用，不同的加熱介質可用于：熱空氣（無論是直接由燃?xì)饣蛲ㄟ^換熱器加熱）氮閉環易爆物品過熱蒸汽更高的容量和消毒產品Hosokawa閃蒸干燥機的主要特點3單元操作一臺機器：干燥研磨/分散和分級于一體，節省空間和運營成本�？刂屏６龋簞討B(tài)分類確保均勻的產品，在水分含量和粒度分布的產品。^小的粉塵排放量：該系統在負壓下工作，^大限度地減少灰塵進入環境。能量高效的運作的植物：數據已被證明，這一概念在任何其他系統相比需要較少的能量消耗低于1千瓦的1公斤水/ h的蒸發。多用途：蛋糕或泥漿在同一臺機器。 優良的清潔能力：可靠性和制造質量的參考數Working principleDeveloped to combine drying, de-agglomeration/milling and classifying principles in one machine. The Micron Flash Dryer has been the first drying system of this type patented in the world.Key features Drying, Milling and Classifying on one single unitMoisture and fineness controlFeed viscosity from 0,2 to 10 m.Pa.s.Drying conditions up to 650°C gas temperatureCompact designNo feed moisture limitationOpen, closed- end recycle system conceptLow residence timeFlash drying down to submicron materialsDrying, Milling and Classifying in one machine The dried particles then enter the classifying zone in the top of the dryer. Fine particles below a specific set point leave the dryer at the outlet and are collected in a suitable filter. Coarse particles rejected by the classifier are internally recycled and returned to the grinding section for further processing.Products SuspensionsSlurriesPastes and doughWet powders with agglomeratesFilter cakesPress cakes after press filtrationThixotropic materialWet grinded nano particle productsDegree of dispersion Based on the amount of dispersion required during the drying process, the execution of the grinding section can be adapted. Several rotors and classifiers give various degrees of dispersion/grinding: Gentle dispersionHigh dispersion for solidsMillingHigh dispersion for suspension and sticky/viscous liquidsSchematic sketch of the heating principle of the Micron Dryer The Micron Dryer is a universal dryer combining direct drying. Heat is basically transferred into the product by a flow of gas to evaporate the solvents and volatiles.Based on the application, different heating media can be used:Hot-Air (either directly heated by gas burning or through an heat exchanger)Nitrogen closed loop for explosive materialsSuperheated steam for higher capacities and sterilization of productsMain features of the Hosokawa Flash dryerOne single machine for 3 unit operations: Drying grinding/dispersing and classifying in one, to save space and operational costs.Particle size control: The dynamic classifier ensures a uniform product both in moisture content and in particle size distribution of the product.Minimal dust emissions: The system operates under negative pressure which minimising dust getting into the environment.Energy efficient operational plant: Data have proven that this concept requires less energy in comparison to any other system with consumption of lower than 1 kW for evaporation of 1 kg water/h.Multi purpose: cakes or slurry in the same machine. Excellent cleanability:Reliability & quality of manufacturingNumber of references正文結束！干燥——國家高新技術企業，多項干燥設備專利單位，行業標準主起草單位；尤其在閃蒸干燥機，噴霧干燥機，真空干燥機，帶式干燥機， 振動流化床，沸騰干燥機的研發制造方面有較強的優勢，歡迎與我們聯系！實驗室離心噴霧干燥機采用菜單式微處理控制器，可以直接設置進口溫度、氣流量、自動通針頻率、蠕動泵速，實現數據采集以及過程監控和控制。自吸蠕動泵將樣品液體從容器中通過噴嘴進入干燥腔，同時壓縮空氣從外層套管進入干燥腔使液體微�；瑹峥諝鈴纳蠈舆M(jìn)入與噴霧后的液體微粒相遇，物品開始干燥，干燥后的粉粒通過旋風分在離心噴霧干燥機使用前應作如下檢查：
�。�1）檢查離心噴霧干燥機各個裝置的軸承和密封部分連接處有無松動；
�。�2）檢查離心噴霧干燥機各個機械部件的潤滑油狀況以及各個水、風、漿管閥口等是否處于所需位置；
�。�3）檢查離心 · 相關行業產品：
· 最新行業資訊：
· 鄭重聲明：
1、本站文章均從網絡搜集轉載，意在傳播更多信息，并不代表本站觀點，本站也無法對其真實性進行考證、負責。
2、如轉載內容牽涉到作品版權問題，并非出于本站故意！在接到相關權利人通知后我們會在第一時間加以更正。
3、轉載本站文章請注明出自http://www.www.cshsd.cn/，謝謝合作！
|
|
